Energy meters 3-phase trafometer

Energy meters for 3-phase systems when current transformers are used. It is compact, only 4 modules wide and has self-powered power supply. The meters are billing approved according to MID (MI003). The current direction must be correct, kWh does NOT count up and the LED does NOT flash if the current direction is incorrect. Current and voltage must be measured on the same phase. Neutral conductor must be available. NOTE the current transformers’ terminal S2 must be earthed and connected to (1) (3) (5) to give the correct current direction." Energymeter 3 pole trafo modbus RS845
E-number
0900191
Article number
108740
Rated voltage [V AC] 400
Frequency [Hz] 50/60
Degree of protection [IP] 20
Wire flexible [mm²] 1-4
Colour Grey
Tightening torque [Nm] 0,4-0,6
Temperature range [C] -25...+55
Storage temperature [C] -30...+70
Modules [pcs] 3
Accuracy class 1
Power loss [W] <1
Phases 3
Standard EN 50470-1
Package size [pcs] 1
Width [mm] 53
Height [mm] 91
Depth [mm] 63
Netweight [kg] 0.24
Mounting method DIN-rail
Name ENERGYMETER 3P T MODB RS485
E-number 0900191
Article number 108740
Type designation GNM3T-RS485
Interface Modbus RS485

More variants of Energy meters 3-phase trafometer

E-number Article number Type designation Interface
ENERGYM 3P TRAFO PULS 0900190 108739 GNM3T Puls
ENERGYMETER 3P T MODB RS485 0900191 108740 GNM3T-RS485 Modbus RS485
ENERGYM 3P TRAFO MBUS 0900192 108741 GNM3T-MBUS Mbus
ENERGYMETER TRAFO 5A MODBUS 0901000 109385 GNM3T-LP RS485 N Modbus RS485